November 12, 2015

Build a Paper Rocket

Learn about the physics of flight with this soaring science activity

By Science Buddies

how to make a good paper rocket

Make a rocket that soars--with science! Learn about the importance of stability in flight, and see how far your paper rocket can fly. 

George Retseck

Key concepts Physics Aerodynamics Flight Stability

Introduction Blast off! Have you ever played with a model or toy rocket, or seen a real rocket launch on TV? In this project you will make simple rockets out of paper and launch them by blowing into a drinking straw. Can you make the rocket that flies the farthest?

Background All flying objects, from rockets to airplanes to birds, have something in common—they need to remain stable when they fly. You are probably pretty familiar with what "stability" means for objects on the ground. Did you use training wheels when you learned how to ride a bike? Training wheels help keep the bike stable so you do not fall over. The same concept applies to things that fly. They need to stay pointed in the same direction when they fly forward, without spinning or tumbling, which could cause them to crash.

On supporting science journalism

If you're enjoying this article, consider supporting our award-winning journalism by subscribing . By purchasing a subscription you are helping to ensure the future of impactful stories about the discoveries and ideas shaping our world today.

You may have noticed that rockets and missiles usually have triangular fins at their bases. The same applies to other long, skinny objects that fly through the air quickly, such as arrows. What purpose do these fins serve? Can they help the rockets fly better? Try this project to find out!

  • Two pieces of paper
  • Drinking straw
  • Scotch tape
  • Clear space in which to launch your "rockets," such as a large room, hallway or outdoor area with no wind
  • Measuring tape (optional)

Preparation

  • Gather all of the materials you will need for the activity.
  • Cut one piece of paper into four smaller rectangles, by cutting it in half lengthwise and widthwise. This will allow you to make four rockets.
  • Wrap one of the paper rectangles around a pencil to form a cylinder, with the long edge of the paper along the length of the pencil.
  • Tape the cylinder closed so it does not unravel (but do not tape it to the pencil).
  • Slide the cylinder off the pencil. Pinch one end of the cylinder shut and seal it with tape. (This is the "front" end of your rocket.) Leave the other end open. This will be your first rocket, with no fins.
  • With plenty of room in front of you—and no obstructions, such as furniture or people—prepare to launch your first rocket! Slide it over a drinking straw. Aim the straw forward, then blow into it as hard as you can. Watch your rocket as it flies. How far does it go? Does it fly straight or does it tumble in midair?
  • Launch your rocket a few more times to see if it flies the same way. If you would like to record your rocket flight distances, be sure to launch it from the same place each time, and measure to the landing spot with a tape measure.
  • Make another paper rocket following the previous steps. Remember to pinch one end and tape it shut.
  • For this rocket, however, you will make fins. Cut out two right triangles (with a 90-degree angle in one corner) from the other piece of paper. The long sides of the triangles should be about eight centimeters. You will fold each triangle to make two fins, so you will have four fins total.
  • Draw a line that splits one triangle in half (from the 90-degree corner to the middle of the long side of the triangle).
  • Draw two lines parallel to the first line (one on each side), about five millimeters away from it.
  • Now, fold the triangle up along these two lines. The result should be two triangles sticking up in the air (the fins), with a flat part connecting them in between.
  • Tape the flat part to the side of your cylinder, toward the open end (the base, or bottom, of your rocket).
  • Repeat these steps for the other triangle, and tape it to your cylinder on the opposite side of the first one. The result should be four fins that form a "+" shape when you look at the rocket from either end. If necessary, bend the fins so they are spaced out 90 degrees apart from one another.
  • Slide the new rocket onto the drinking straw and launch it. How far does this rocket go? How does its flight compare with your first finless rocket? Does it go farther? Does it tumble or does it fly straight? Do you think fins help the stability of your rocket?
  • Launch it a few more times. If you are measuring the flight distance of each rocket, use a tape measure and record how far it flew.
  • Extra: Try different numbers of fins. For example, what happens if you only use two fins instead of four?
  • Extra: Try different shapes for fins. For example, what happens if you make semicircular fins instead of triangles?
  • Extra: Try attaching the fins at different points along the length of your rocket. Do the fins still work if you put them in the middle or front of the rocket instead of the back?

[break] Observations and results You should have seen that your finless rocket flew straight at first but quickly spiraled out of control. It might have tumbled through the air and fluttered to the ground, almost like a leaf falling from a tree. This is because the rocket did not have fins to keep it stable. If it started turning just a little bit, then it would start turning even more rapidly until it completely lost control. In contrast, your second rocket that had fins should have flown straight, and traveled much farther as a result. This is because the fins help keep the rocket stable, or pointed in the same direction. If the rocket turns a little bit, the fins help turn it back in the original direction.

More to explore How to Make a Soda-Straw Rocket , from NASA Rocket Aerodynamics , from Science Learning Stability Science: How Tails Help a Kite Fly , from Scientific American Soaring Science: Test Paper Planes with Different Drag from Scientific American Science Activities for All Ages , from Science Buddies

This activity brought to you in partnership with Science Buddies

Science Buddies

Lorem ipsum dolor amet, modus intellegebat duo dolorum graecis

logo

Paper Rocket

Our guide to crafting and launching paper rockets brings family fun to new heights. From creative designs to safety tips, let’s soar together into the thrilling world of paper rocketry. Buckle up for an adventure that sparks imagination and bonds. Let’s launch some memories!

What do I need to play?

Are you ready to embark on a thrilling journey as we explore the fascinating world of paper rocketry. To get started, you’ll need a few simple materials:

Paper: Opt for sturdy construction or cardstock paper for optimal rocket durability. Tape: A reliable adhesive to keep your rocket parts together. Scissors: Precision cutting is key for crafting your rocket’s aerodynamic design. Markers or Colored Pencils: Add a splash of creativity to your rocket’s exterior.

Now that we’ve gathered our supplies, let’s move on to setting up the game!

Setting up the game

Creating your own paper rocket is a fantastic DIY project that promises hours of entertainment. Follow these steps to set up the game:

Step 1: Design Your Rocket Unleash your imagination! Sketch out a sleek rocket design on the paper, considering aerodynamics for optimal flight.

Step 2: Cut and Fold Carefully cut out your rocket design and fold it according to your planned blueprint. The precision of your folds will impact the rocket’s stability in flight.

Step 3: Secure with Tape Use tape to secure the edges and folds of your rocket. Make sure it’s tightly sealed for maximum air resistance during launch.

Step 4: Add Color Get creative! Use markers or colored pencils to decorate your rocket. This not only adds flair but also aids in easy identification during friendly competitions.

With your rocket ready, let’s delve into the rules of the game.

Rules of the game

Launching your paper rocket comes with a set of exhilarating rules to ensure fair play and maximum enjoyment:

Rule 1: Safe Launch Zones Select a spacious, open area free from obstacles. Ensure that everyone maintains a safe distance during launches.

Rule 2: Launch Order Establish a launch order to avoid chaos. Let each participant take turns, creating an atmosphere of friendly competition.

Rule 3: Scoring System Introduce a scoring system based on factors like distance covered, accuracy, and creativity in rocket design. This adds an exciting element of competition.

Rule 4: Rocket Retrieval Implement a retrieval system to collect rockets after each launch, promoting environmental responsibility.

Ready for some added excitement? Let’s explore variations of the game!

Variations of the game

Spice up your paper rocket adventures with these creative variations:

1. Target Practice Set up targets and assign different point values to enhance precision in rocket launching.

2. Team Challenges Form teams and collaborate on creating and launching rockets, fostering teamwork and camaraderie.

3. Night Launches Attach glow sticks to your rockets for a spectacular night launch experience. This adds a magical touch to the game.

4. Speed Challenges Time your launches and compete for the title of the fastest paper rocket engineer.

Feeling confident? Let’s explore some tips for success in mastering the art of paper rocketry!

Tips for Success

Launching paper rockets can be a breeze with these insightful tips:

Experiment with Designs: Test different rocket designs to find the perfect balance between aerodynamics and stability. Adjust Angles: Tweak launch angles to achieve the desired flight trajectory. Weather Awareness: Consider wind conditions and choose a calm day for the best rocket launches. Safety First: Always prioritize safety. Ensure participants are aware of safety guidelines and adhere to them diligently.

And there you have it, a comprehensive guide to making and launching paper rockets! By following our playful yet precise instructions, you’re bound to elevate your rocket game and soar to new heights of fun. Remember, the sky’s the limit, so go ahead and embark on this thrilling adventure with your custom-designed paper rockets. Happy launching!

papercanyon.com

Easy Guide to Making a Paper Rocket DIY for Kids [Free Template]

Share with whom you care:.

Boost your child’s motor and sensory skills with these fun and engaging Paper Rocket DIY Craft.

Do you want to encourage your kids to have fun while learning new skills? Then why not try making a paper rocket for kids?

DIY Paper Rocket for Kids

It’s a simple, easy and inexpensive project that’s perfect for kids of all ages.

This fun activity will keep them engaged for hours and encourage them to explore their creativity and imagination.

DIY Paper Projects are a great way to improve your child’s motor and sensory skills.

These simple projects like making a paper rocket can have a big impact on your child’s development.

From cutting and taping to using their imagination, these projects will help your child improve their fine motor skills and stimulate their senses.

In this guide, we’ll show you step-by-step how to make your own paper rocket, and the best part is you only need a few materials.

  • Rocket printout. A free downloadable template on Rocket is included in this post.

Colored Pens/Pencils

Step-by-Step to Make a Paper Rocket

download the FREE template to make a paper rocket

Step 1: Print out the template

The first step in making your Paper Rocket DIY for Kids is to print out a template. You can scroll down to find a downloadable template of rocket to print. If you’re creating your own, make sure the template is symmetrical and has a cone shape.

Step 2: Cut out the template

Once you’ve printed out the template, use the scissors to carefully cut it out. It’s important to be precise and to follow the lines of the template to ensure the rocket will look symmetrical when assembled.

Carefully Cut the different parts of the rocket

Step 3: Color the rocket parts

This is the fun part! Use the marker and any coloring material you have to make your paper rocket look as cool as possible. Encourage your kids to use their imagination and let them have fun decorating their own rockets.

Color the Circle

Step 4: Assemble the rocket parts

Once the rocket is decorated, it’s time to assemble it. Start by rolling the template into a cone shape, making sure to overlap the edges and tape them together to keep the shape. Then, use tape to secure the edges of the rocket.

Rocket Glue the Window

Step 5: Display your rocket!

The final step is to click some awesome photos of your Paper Rocket. You can post these photos on our facebook page.

Step-by-Step Guide to Making a Paper Rocket DIY for Kids

You can also save all your kids’ artwork and other photos online by hosting your own website. You can reach out to us for a unique website name matching your child’s name or any other name that you could resonate with. We will help you in creating a unique website for you.

Related: Learn to Draw the Grinch

Subscribe to PaperCanyon!

SUBSCRIBE for first-hand access to our huge collection of exclusive FREE printables updated from time-to-time!

A Guide to Making a Paper Rocket DIY for Kids [Free Template]

A Guide to Making a Paper Rocket DIY for Kids [Free Template]

Making a paper rocket is a fun and easy activity that kids can do with just a few materials. You’ll need rocket template, scissors, tape or glue, a marker, and any colored pens or pencils. First, you’ll print out the rocket template or draw your own. Then you’ll cut it out and color it however you want. Once it’s colored, you’ll need to glue the parts together. That’s it. You have your beautiful paper rocket ready! Making a paper rocket is a fun way to use your imagination, practice cutting, coloring and gluing, and play with your friends and family. Try making one today!

Rocket Template

Step-by-step

  • Printout of the template You can download the rocket template to your device and take a print of it. You can find the downloadable rocket template in this article.
  • Cut out the template Cut the parts of the rocket carefully. Be watchful of your hands and fingers. Parents should supervise kids in properly cutting the template.
  • Color/Decorate the rocket Use color options that are displayed here or you are free to color it in your own style.
  • Assemble the rocket Now, get ready to assemble the rocket parts. Glue the parts well so that they look neat and clean.
  • Display your rocket! Your paper rocket is ready for display. You can place it on a colored sheet to make it stand out and look beautiful.

Craft Video

lyteCache.php?origThumbUrl=https%3A%2F%2Fi.ytimg.com%2Fvi%2FbhdezjjzH7w%2F0

  • Parents need to be very careful while using scissors. They should assist their kids in an activity that involves sharp objects like scissors.

Download the FREE Template!

I agree to receive your newsletters and accept the data privacy statement.

You can also visit Wikipedia if you wish to learn more about rockets.

You can leave any comment or share any ideas for us on our Contact Us page.

leeisha image bnw

Creative Artist

Leeisha is a talented artist with a passion for drawing, coloring, painting, and making paper crafts. Known for her charming and talkative personality, She always finds new and exciting ways to bring her imagination to life. Whether through sketching, coloring, or paper crafting, Leeisha has a gift for turning her ideas into beautiful works of art.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 3

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

Similar Posts

Mastering the Art of Paper Tearing: Easy Tips and Techniques

Mastering the Art of Paper Tearing: Easy Tips and Techniques

Unique and Fun Arts & Crafts Ideas With Paper That Toddlers Will Love

Unique and Fun Arts & Crafts Ideas With Paper That Toddlers Will Love

How to Make Christmas Themed Bookmarks

How to Make Christmas Themed Bookmarks

Best Types of Paper for Sleek ‘n’ Chic Crafting [Updated 2023]

Best Types of Paper for Sleek ‘n’ Chic Crafting [Updated 2023]

BEARDED SCIENCE GUY

How to make a paper rocket under $5.

YouTube Video

Watch the Paper Rocket Experiment

Paper rocket supply list.

Pen or pencil

Empty 2-liter bottle

½ inch PVC pipe 

½ inch PVC elbows (2) 

Card stock paper

Scotch tape

Electrical tape

Don't forget your safety gear!

Safety goggles

Follow the Bearded Science Guy:

Art Fun

Image that reads Space Place and links to spaceplace.nasa.gov.

Build a Bubble-Powered Rocket!

Build your own rocket using paper and fizzing tablets! Watch it lift off. How high does your rocket go? Print this page for the instructions.

Suggestion:

Find a grown-up to do this activity with you.

Paper, regular 8-1/2- by 11-inch paper, such as computer printer paper or even notebook paper.

Plastic 35-mm film canister (see hints below)

Cellophane tape

Effervescing (fizzing) antacid tablet (the kind used to settle an upset stomach)

Paper towels

Eye protection (like eye glasses, sun glasses, or safety glasses)

The film canister MUST be one with a cap that fits INSIDE the rim instead of over the outside of the rim. Sometimes photography shops have extras of these and will be happy to donate some for such a worthy cause.

Keep in mind:

Just like with real rockets, the less your rocket weighs and the less air resistance (drag) it has, the higher it will go.

Making the Rocket

You must first decide how to cut your paper. You may cut it the short way or the long way to make the body of the rocket. There is no one right way to make a paper rocket. Try a long, skinny rocket or a short, fat rocket. Try a sharp nosecone or a blunt nosecone. Try it with fins or without fins. Experiment!

Here's just one idea for how you might cut your whole rocket from one piece of paper:

Young rocket engineer

Cut out all the pieces for your rocket.

Wrap and tape a tube of paper around the film canister. Hint: Tape the canister to the end of the paper before you start wrapping.

Important! Place the lid end of the canister down .

Tape fins to your rocket body, if you want.

Roll the circle (with a wedge cut out) into a cone and tape it to the rocket's top.

Blasting Off

Put on your eye protection.

Turn the rocket upside down and remove the canister's lid.

Fill the canister one-third full of water.

Now work quickly on the next steps!

Drop one-half of an effervescing antacid tablet into the canister.

Snap the lid on tight.

Stand your rocket on a launch platform, such as your sidewalk or driveway.

Stand back and wait. Your rocket will blast off!

So, Dr. Marc, how does the pop-rocket work?

When the fizzy tablet is placed in water, many little bubbles of gas escape. The bubbles go up, instead of down, because they weigh less than water. When the bubbles get to the surface of the water, they break open. All that gas that has escaped from the bubbles pushes on the sides of the canister.

Now when you blow up a balloon, the air makes the balloon stretch bigger and bigger. But the little film canister doesn't stretch and all this gas has to go somewhere!

Eventually, something has to give! So the canister pops its top (which is really its bottom, since it's upside down). All the water and gas rush down and out, pushing the canister up and up, along with the rocket attached to it.

We call this wonderful and useful fact the law of action and reaction . The action is the gas rushing out of the rocket. The reaction is the rocket taking off in the other direction. In other words, for every action there is an equal and opposite reaction. The rocket goes in the opposite direction from the gas, and the faster the gas leaves the rocket, the faster the rocket gets pushed the other way.

Launch of Delta rocket

Delta rocket similar to the one that launched the Deep Space 1 spacecraft from Cape Canaveral, Florida, in October 1998.

Real rockets work kind of the same way as the pop rocket. But instead of using tablets that fizz in water, they use rocket fuel.

The rocket that launched Deep Space 1 on October 24, 1998, had four different kinds of engines. Some pushed the rocket off the ground. Then some helped it continue its climb into space. Others gave the Deep Space 1 spacecraft its final push away from Earth. But all of them forced a gas to shoot out of the rocket, thus pushing the rocket the other way.

If you liked this, you may like:

Illustration of a game controller that links to the Space Place Games menu.

Quill And Fox

Best Design Studio

how to make a good paper rocket

Amber Robertson

Amber Robertson is the founder of Quill and Fox. A creative writing studio that helps people find their voice and share their stories. Amber is also a published author, with her first book slated for release in 2020. She loves spending time with her family and friends, reading, writing, and traveling. When Amber was younger, she loved to write short stories and plays. But somewhere along the way, she lost touch with her creativity. It wasn’t until she became a mom that she realized how important it was to share her stories—both the good and the bad—with the people she loves most. That’s when Quill and Fox was born. Amber is passionate about helping others find their voice and share their stories. She believes that every person has a story worth telling, and it’s her mission to help them tell it in a way that is authentic and true to themselves

How To Make A Paper Rocket

How to Make a Paper Rocket: A Step-by-Step Guide

' src=

Table of Contents

If you’re looking for a fun and easy DIY project, making a paper rocket is a great choice. Not only is it a fun activity, but it can also be educational, as you learn about the physics behind rocket flight. In this step-by-step guide, we’ll show you how to make a paper rocket that’s easy to assemble and launch.

Assembling a paper rocket using household items

Before you get started, you’ll need to gather a few materials. Here’s what you’ll need:

  • Paper (preferably lightweight and easy to fold, like printer paper)
  • Decorative materials (optional)

Each material serves a specific purpose in making a paper rocket. The paper will be used to create the body, while the scissors will help you cut out the fins and nose cone. The tape and glue stick will be used to secure the pieces together, and the pencil and ruler will help you measure and mark the paper.

Preparation

Once you have all the materials you need, it’s time to start preparing. Here’s what you’ll need to do:

  • Cut a rectangular piece of paper that measures 8.5 x 11 inches. This will be the body of the rocket.
  • Cut out a triangular piece of paper that measures 3 x 3 inches. This will be the nose cone.
  • Cut out three rectangular pieces of paper that measure 2 x 4 inches. These will be the fins.
  • Fold the rectangular piece of paper in half lengthwise, then unfold it. This will create a crease down the middle that will help you align the other pieces.
  • Use the ruler and pencil to mark a line down the center of the paper, parallel to the crease. This will help you align the fins and nose cone.

By following these preparation steps, you’ll be ready to start assembling your paper rocket.

Now that you have all the necessary materials and have made the initial cuts, it’s time to start preparing them for assembly. Here’s a step-by-step guide to help you prepare:

  • Take the triangular piece of paper that you cut out for the nose cone and roll it into a cone shape. Use the glue stick to secure the edges and hold the cone in place. Let it dry for a few minutes.
  • Take the three rectangular pieces of paper that you cut out for the fins and fold them in half lengthwise. Then, fold them in half again, but this time widthwise. This will create a crease in the center of each piece that will help you attach them to the body of the rocket.
  • Use the scissors to make diagonal cuts on the bottom of each fin, creating a pointy shape. This will help the fins cut through the air more efficiently.
  • Take the rectangular piece of paper that you cut out for the body of the rocket and fold it in half lengthwise again. This time, crease it firmly and then unfold it. Use the ruler to make a mark 1 inch from the top of the paper on the fold line. This will be the point where you attach the nose cone later.

It’s important to handle the materials carefully and precisely in order to create a well-constructed paper rocket. Take your time with each step, and make sure that each piece is properly folded and cut to size.

Now that you have all the pieces prepared, it’s time to start assembling your paper rocket. Here’s a detailed guide to help you put it all together:

  • Take one of the fins and apply a thin line of glue to one side of the creased center. Align the bottom of the fin with the bottom of the rocket body and press the glued side firmly onto the body. Repeat this step with the other two fins, spacing them evenly around the body of the rocket.
  • Apply a line of glue around the inside edge of the nose cone. Carefully slide the nose cone onto the top of the rocket body, aligning it with the mark you made earlier.
  • Use a small piece of tape to secure the nose cone to the body of the rocket. This will help keep it in place during launch.
  • Let the glue dry for a few minutes before launching your paper rocket.

For a more visual aid, you can refer to many online tutorials on how to make a paper rocket. By following these steps, you’ll have a paper rocket that’s ready to launch and soar through the air.

Once you’ve assembled your paper rocket, it’s time to launch it. Here’s how to do it:

  • Find an open outdoor space, free of trees and buildings. This will give your rocket plenty of room to fly.
  • Hold the rocket by the body, with the nose cone facing up.
  • Use your other hand to blow a quick burst of air into the bottom of the rocket. This will launch it into the air.
  • Watch as your rocket soars through the sky!

It’s important to take safety precautions when launching your paper rocket. Make sure to launch it away from people and animals, as the fins can be sharp and potentially dangerous. Additionally, never launch your rocket indoors, as it can cause damage to walls and furniture.

Making a paper rocket is a fun and easy project that anyone can do. By following the steps outlined in this guide, you can create a rocket that’s both fun to assemble and launch. Remember to gather all the materials you need, prepare the pieces before assembling, and take safety precautions when launching.

To improve your rocket’s performance, try experimenting with different materials or adding weight to the nose cone. You can also try launching your rocket on a windy day, which will give it an extra boost. With a little creativity and experimentation, you can make a paper rocket that’s truly out of this world!

Osmo

Tutorial: How to Make a Paper Rocket

Make a Paper Rocket Step by Step🚀: Fun Activities for Kids | Osmo

Make a paper rocket launcher in no time with just a few easy steps.

Materials required:

  • Colored paper

Instructions:

  • Fold colored paper into fourths
  • Cut along the folds (adult supervision recommended)
  • Roll the paper around your straw
  • Secure the roll with tape
  • Pinch and tape one end
  • Fold the paper as shown in the video
  • Cut triangles from your folded paper
  • Use tape to attach the triangles to the “straw roll”
  • Place your rocket onto a straw; blow on it and watch your rocket launch!

Sign up for our newsletter!

Stay up-to-date with Osmo and also receive special deals and offers!

Featured Products

how to make a good paper rocket

Recommended Posts

Osmo on instagram.

Select website language

NASA Logo

Suggested Searches

  • Climate Change
  • Expedition 64
  • Mars perseverance
  • SpaceX Crew-2
  • International Space Station
  • View All Topics A-Z

Humans in Space

Earth & climate, the solar system, the universe, aeronautics, learning resources, news & events.

how to make a good paper rocket

Teams Add Iconic NASA ‘Worm’ Logo to Artemis II Rocket, Spacecraft

A sample of fabric burns inside Spacecraft Fire Experiment-IV (Saffire-IV). The sample is a composite fabric made of cotton and fiberglass and is 40 cm wide. The image appears green on the right because green LED lights are used to illuminate the sample during the burn. An orange flame sits top to bottom in the center of the image with a dark region between the orange and green areas. Bright specks on a black background to the left of the orange area show the smoldering cotton that remains on the fiberglass substrate after the flame passes

Flame Burns Out on NASA’s Long-Running Spacecraft Fire Experiment

Artist's concept of magnetar is depicted losing material into space

NASA Telescopes Find New Clues About Mysterious Deep Space Signals

  • Search All NASA Missions
  • A to Z List of Missions
  • Upcoming Launches and Landings
  • Spaceships and Rockets
  • Communicating with Missions
  • James Webb Space Telescope
  • Hubble Space Telescope
  • Why Go to Space
  • Commercial Space
  • Destinations
  • Living in Space
  • Explore Earth Science
  • Earth, Our Planet
  • Earth Science in Action
  • Earth Multimedia
  • Earth Science Researchers
  • Pluto & Dwarf Planets
  • Asteroids, Comets & Meteors
  • The Kuiper Belt
  • The Oort Cloud
  • Skywatching
  • The Search for Life in the Universe
  • Black Holes
  • The Big Bang
  • Dark Energy & Dark Matter
  • Earth Science
  • Planetary Science
  • Astrophysics & Space Science
  • The Sun & Heliophysics
  • Biological & Physical Sciences
  • Lunar Science
  • Citizen Science
  • Astromaterials
  • Aeronautics Research
  • Human Space Travel Research
  • Science in the Air
  • NASA Aircraft
  • Flight Innovation
  • Supersonic Flight
  • Air Traffic Solutions
  • Green Aviation Tech
  • Drones & You
  • Technology Transfer & Spinoffs
  • Space Travel Technology
  • Technology Living in Space
  • Manufacturing and Materials
  • Science Instruments
  • For Kids and Students
  • For Educators
  • For Colleges and Universities
  • For Professionals
  • Science for Everyone
  • Requests for Exhibits, Artifacts, or Speakers
  • STEM Engagement at NASA
  • NASA's Impacts
  • Centers and Facilities
  • Directorates
  • Organizations
  • People of NASA
  • Internships
  • Our History
  • Doing Business with NASA
  • Get Involved
  • Aeronáutica
  • Ciencias Terrestres
  • Sistema Solar
  • All NASA News
  • Video Series on NASA+
  • Newsletters
  • Social Media
  • Media Resources
  • Upcoming Launches & Landings
  • Virtual Events
  • Sounds and Ringtones
  • Interactives
  • STEM Multimedia

All the major structures that will form the core stage for NASA’s SLS (Space Launch System) rocket for the agency’s Artemis III mission are structurally complete. Technicians finished welding the 51-foot liquid oxygen tank structure, left, inside the Vertical Assembly Building at NASA’s Michoud Assembly Facility in New Orleans Jan. 8. The liquid hydrogen tank, right, completed internal cleaning Nov. 14.

Rocket Propellant Tanks for NASA’s Artemis III Mission Take Shape

Hubble Views a Massive Star Forming

Hubble Views a Massive Star Forming

Arctic Ocean

Meet NASA’s Twin Spacecraft Headed to the Ends of the Earth

What’s made in a thunderstorm and faster than lightning gamma rays.

OpenET Study Helps Water Managers and Farmers Put NASA Data to Work

OpenET Study Helps Water Managers and Farmers Put NASA Data to Work

Eclipse 2024 Science

Eclipse 2024 Science

Eclipse 2024 Citizen Science

Eclipse 2024 Citizen Science

Spot the King of Planets: Observe Jupiter

Spot the King of Planets: Observe Jupiter

Stars Sparkle in New Hubble Image

Stars Sparkle in New Hubble Image

Eclipse Soundscapes

Eclipse Soundscapes

Eclipse Megamovie 2024

Eclipse Megamovie 2024

The DC-8 aircraft takes off from Palmdale, California, ascending against a cloudy gray sky

NASA Collaborates in an International Air Quality Study

This image is an illustration of NASA's Ingenuity Helicopter flying on Mars.

Special Report: Aeronautics Honors Ingenuity

A graphic showing various aviation careers that could be part of Advanced Air Mobility.

NASA Releases STEM Toolkit for Advanced Air Mobility

Photo of a Laser Retroreflector Array (LRA).

How NASA Uses Simple Technology to Track Lunar Missions

Overview

Legacy Systems

how to make a good paper rocket

Career Journey: Building Strength as an Astronaut Fitness Trainer

The 2024 National Science Bowl regional competition hosted by JPL included 21 schools, with this team from Irvine’s University High School taking first place. From left, coach David Knight, Feodor Yevtushenko, Yufei Chen, Nathan Ouyang, Wendy Cao, and Julianne Wu.

University High School Wins Regional Science Bowl at NASA’s JPL

An external image of the Alabama A&M University Agribition Center from the front facade. The Center is a cream-colored stone building with a curved roof, floor-to-ceiling windows, and concrete steps that lead to a covered awning, framed by deep-red structural beams above. Shrubs and crepe myrtle trees frame the foreground and steps leading up to the building. Photo courtesy of AAMU Extension

NASA Taps Alabama A&M University to Host Break the Ice Lunar Challenge

Shobhana Gupta

Solver Spotlight: Shobhana Gupta

The shiny sphere-shaped Vanguard II satellite is prepared for launch in 1959.

NASA Goddard’s Beginnings in Project Vanguard

A computer generated image of objects in Earth orbit that are currently being tracked.

ROSES-24 is live and OTPS has funding opportunities in sustainability!

NASA astronaut Frank Rubio uses a tool in his right hand as he activates a space biology experiment that is studying how weightlessness affects genetic expression in microbes.

Ciencia destacada del año en el espacio del astronauta Frank Rubio

Frank Rubio, un hombre de pelo y ojos oscuros y con lentes, sonríe y tiene los brazos cruzados. Va vestido con un polo oscuro y pantalones khaki. Detrás suyo se ve la atmósfera de la Tierra a través de las ventanas de observación de la cúpula.

Misión récord de astronauta ayuda a planificar viajes al espacio profundo

monnikin

Pruebas de la NASA con maniquí de Artemis I aportan información para futuras misiones tripuladas

Make a Straw Rocket

Materials for making a straw rocket

Grade Levels

Grades K-4, Grades 5-8

Engineering Design, Physical Science, Technology, Forces and Motion, Rocketry

Hands-on Activities

Learn how to create a paper rocket that can be launched from a soda straw – then, modify the design to make the rocket fly farther!

Find materials and step-by-step instructions on the website below.

  • PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
  • EDIT Edit this Article
  • EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
  • Browse Articles
  • Learn Something New
  • Quizzes Hot
  • This Or That Game New
  • Train Your Brain
  • Explore More
  • Support wikiHow
  • About wikiHow
  • Log in / Sign up
  • Arts and Entertainment
  • Model Rockets

How to Make a Simple Rocket

Last Updated: February 6, 2024

This article was co-authored by Jessie Antonellis-John . Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications. This article has been viewed 228,828 times.

Rockets capture the imaginations of adults and children alike. Unfortunately, we often refer to “rocket science” as if it is the most complicated subject on the planet. While some highly advanced rockets are engineered with extreme precision, you can still make very simple rockets at home. There are several ways to make a homemade rocket from launching matches to shooting off water rockets.

Building a Match Rocket

Step 1 Roll two matches in a piece of aluminum foil.

  • When the match heads ignite, gas is rapidly formed and this expanding gas forces the loose match out of the aluminum holder with a considerable amount of force.

Launching a Rocket with Water and Air

Step 1 Gather your materials.

Make a Rocket with Household Chemicals

Step 1 Tape pencils around a bottle.

Community Q&A

Community Answer

  • Change the amounts or types of fuel for different results. Thanks Helpful 0 Not Helpful 0
  • Look into more complex rockets like the sugar rocket. Thanks Helpful 0 Not Helpful 0

Tips from our Readers

  • Stand back to make sure the bottle doesn't hit you when it takes off.

how to make a good paper rocket

  • Do this only under the supervision of a responsible adult. Thanks Helpful 17 Not Helpful 15
  • While all of these ingredients are fairly safe, goggles and gloves will protect you while launching rockets. Thanks Helpful 16 Not Helpful 15

You Might Also Like

how to make a good paper rocket

  • ↑ https://www.youtube.com/watch?v=5hWfXna42jU
  • ↑ https://news.lenovo.com/stem-at-home-water-powered-rocket/

About This Article

Jessie Antonellis-John

To make a simple match rocket, first roll 2 matches in a small piece of aluminum foil so the match tops are covered and the sticks are poking out at the end. Then, twist the end of the foil closed near the match tips and leave the other end rolled loosely. Once your matchsticks are wrapped, anchor them by stabbing them into a piece of cardboard so they stand up on their own. Finally, hold a lighter under the part of the foil that holds the match tips. When they get hot enough, the matchsticks will rocket out of their aluminum holder! To learn how to make a rocket with baking soda, read on! Did this summary help you? Yes No

  • Send fan mail to authors

Reader Success Stories

Moofy Moo

Jul 24, 2020

Did this article help you?

how to make a good paper rocket

Tanmay Junghare

Aug 16, 2018

Am I a Narcissist or an Empath Quiz

Featured Articles

How to Make Friends in Your 20s after College

Trending Articles

Everything You Need to Know to Rock the Corporate Goth Aesthetic

The Tech Edvocate

  • Advertisement
  • Home Page Five (No Sidebar)
  • Home Page Four
  • Home Page Three
  • Home Page Two
  • Icons [No Sidebar]
  • Left Sidbear Page
  • Lynch Educational Consulting
  • My Speaking Page
  • Newsletter Sign Up Confirmation
  • Newsletter Unsubscription
  • Page Example
  • Privacy Policy
  • Protected Content
  • Request a Product Review
  • Shortcodes Examples
  • Terms and Conditions
  • The Edvocate
  • The Tech Edvocate Product Guide
  • Write For Us
  • Dr. Lynch’s Personal Website
  • The Edvocate Podcast
  • Assistive Technology
  • Child Development Tech
  • Early Childhood & K-12 EdTech
  • EdTech Futures
  • EdTech News
  • EdTech Policy & Reform
  • EdTech Startups & Businesses
  • Higher Education EdTech
  • Online Learning & eLearning
  • Parent & Family Tech
  • Personalized Learning
  • Product Reviews
  • Tech Edvocate Awards
  • School Ratings

How to Make a No Sew Blanket

3 ways to stop bike brakes from screeching, how to build a perfect pokémon, 8 ways to use comment boxes in microsoft word, 3 simple ways to rent out your boat, how to improve school spirit, 3 ways to know if you have a crush on a guy, 5 simple ways to lose weight rollerblading, 3 ways to keep your man from cheating, how to give up marijuana, how to make a paper rocket: 14 steps.

how to make a good paper rocket

Step 1: Gather Materials

For this project, you will need the following:

– A piece of A4 size paper or letter-sized paper

– A straw

– Scissors

– Tape

– A ruler

– Pencil or pen

Step 2: Fold the Paper in Half

Fold the paper in half lengthwise, then unfold it. This is to create a guideline for folding in future steps.

Step 3: Fold the Top Corners Down

Fold both top corners down so they meet at the center line you created in Step 2.

Step 4: Fold the New Top Corners Again

Repeat Step 3, folding the new top corners down to meet at the center line.

Step 5: Create Wings for Your Rocket

Fold your paper along the centerline again. Flip it over and fold each side of your rocket outwards on both sides to create wings. Ensure they stay symmetrical on both sides.

Step 6: Take Measurements & Mark your Rocket Body

Using a ruler, measure roughly one third (1/3) from the bottom of your rocket and mark it with a pencil or pen.

Step 7: Make Fins for Your Rocket

Draw two diagonal lines from your mark to each bottom corner of your rocket, creating a triangular shape (these will be your fins).

Step 8: Cut Out the Fins

Carefully cut along the lines you’ve drawn, starting at the bottom corners up until your marked points.

Step 9: Refold Your Fins

Unfold the cut triangles and fold them outwards so they lay flat against each other perpendicularly to the rocket body.

Step 10: Reinforce Your Fins

Tape over the fold between the fins and rocket body to ensure proper alignment and reinforcement.

Step 11: Create a Launch Tube for Straw

Roll the top part of the rocket into a tight cylinder, leaving enough room in the center for your straw to fit.

Step 12: Secure the Launch Tube

Use tape to secure your launch tube and prevent it from unrolling.

Step 13: Insert Straw

Gently insert the straw through the launch tube until it reaches the bottom of the rocket, making sure not to bend or damage your rocket.

Step 14: Ready for Takeoff!

Your paper rocket is now complete and ready for launch! Go outside and blow into the straw to send your rocket soaring into the sky. Enjoy your homemade flying masterpiece and experiment with different folding techniques and paper types to create a unique fleet of paper rockets.

How to Do the Twist: 14 Steps

10 easy ways to avoid miscommunication in ....

' src=

Matthew Lynch

Related articles more from author.

how to make a good paper rocket

9 Ways to Paddle Board

how to make a good paper rocket

How to Harvest Cashews: 9 Steps

how to make a good paper rocket

5 Ways to Change a Statement to Question

how to make a good paper rocket

How to Prevent Sweaty Armpits: 8 Steps

how to make a good paper rocket

3 Ways to Keep Fishing Worms Alive for Fishing

how to make a good paper rocket

How to Wax a Floor

IMAGES

  1. Learn to fold a Retro Rocket for World Space Week!

    how to make a good paper rocket

  2. Paper Rockets That Fly 100 Yards

    how to make a good paper rocket

  3. How To Make Paper Rocket Easy

    how to make a good paper rocket

  4. Kids Crafts : How to Make a Paper Rocket at Home |How to Make a Mini

    how to make a good paper rocket

  5. Paper Rocket : 8 Steps

    how to make a good paper rocket

  6. Origami: Rocket

    how to make a good paper rocket

VIDEO

  1. How to Make Paper Plane Fly More Than 10000 Feet

  2. Rocket Paper

  3. How to Make Good Paper Airplane

  4. 🤔 how to make a rocket with paper simply #craft #art #tutorial #drawing

  5. Easiest paper Rocket tutorial In Less than 1 minute ☄️

  6. How to make a paper rocket #shorts #youtubeshorts #viral

COMMENTS

  1. How to Make a Paper Rocket: 14 Steps (with Pictures)

    Crafts Paper Craft How to Make a Paper Rocket Download Article A quick and easy guide to creating and launching a paper rocket Co-authored by Jessie Antonellis-John Last Updated: December 5, 2023 Making the Nose Cone | Making the Rocket Body | Adding Wings | Flying the Rocket | Video | Q&A | Tips | Warnings | Things You'll Need

  2. Build a Paper Rocket

    Physics Aerodynamics Flight Stability Introduction Blast off! Have you ever played with a model or toy rocket, or seen a real rocket launch on TV? In this project you will make simple...

  3. How to make an Origami simple paper rocket in 3 steps

    Mr.Paper Crafts 13.3K subscribers Subscribe Subscribed 384K views 3 years ago Hi Friends, Today I am sharing a origami simple paper rocket making instruction step by step.You need a paper...

  4. How to Make a Far Flying Paper Rocket: Simple Instructions

    1 Grab the cardstock. Lay it flat on a table. Place your copper pipe lengthwise on top of the paper so the rocket is long and thin. Make sure the top edge of the paper is even with the rest of the page. Use your copper pipe (or any other thin, round tube) to create the shape of the rocket by rolling the paper around the pipe. [1]

  5. Build a Paper Rocket

    Instructions Cut one piece of paper into four smaller rectangles, by cutting it in half lengthwise and widthwise. This will allow you to make four rockets.

  6. How to Make Origami Rockets (2 Easy & Fun Designs)

    1. Fold the paper in half Start by folding the paper in half to make a center crease. Once this crease is made, unfold the paper. 2. Fold both sides to the center crease Bring both the left and right edges to meet at the vertical crease line. Remember to press the edges of the folds well to keep them flat and even. 3.

  7. How to Make a Paper Rocket

    Step 1: Design Your Rocket Unleash your imagination! Sketch out a sleek rocket design on the paper, considering aerodynamics for optimal flight. Step 2: Cut and Fold Carefully cut out your rocket design and fold it according to your planned blueprint. The precision of your folds will impact the rocket's stability in flight. Step 3: Secure with Tape

  8. Easy Guide to Making a Paper Rocket DIY for Kids [Free Template]

    Step 1: Print out the template Step 2: Cut out the template Step 3: Color the rocket parts Step 4: Assemble the rocket parts Step 5: Display your rocket! Supplies Rocket printout. A free downloadable template on Rocket is included in this post. Scissors Tape/Glue Marker Colored Pens/Pencils Step-by-Step to Make a Paper Rocket Paper Rocket Template

  9. Paper Rockets

    PROCEDURE: Cut a narrow rectangular strip of paper about 5 inches long and roll it tightly around the fat pencil. Tape the cylinder and remove it from the pencil. Cut crown points into one end of the cylinder and slip it back onto the pencil.

  10. How to Make Paper Rockets

    Scotch tape Electrical tape Don't forget your safety gear! Lab coat Safety goggles Watch the video Follow the Bearded Science Guy: In this science experiment you can do at home, we walk through how to make a paper rocket for less than $5.00.

  11. Build a Bubble-Powered Rocket!

    Here are the basic steps: Cut out all the pieces for your rocket. Wrap and tape a tube of paper around the film canister. Hint: Tape the canister to the end of the paper before you start wrapping. Important! Place the lid end of the canister down. Tape fins to your rocket body, if you want.

  12. How to Make a Paper Rocket: A Step-by-Step Guide

    Here's what you'll need to do: Cut a rectangular piece of paper that measures 8.5 x 11 inches. This will be the body of the rocket. Cut out a triangular piece of paper that measures 3 x 3 inches. This will be the nose cone. Cut out three rectangular pieces of paper that measure 2 x 4 inches. These will be the fins.

  13. Video: How to Make a Paper Rocket

    To make a paper rocket, cut out a 5 by 5 inch paper square, a paper circle the size of a plastic cup, and two paper triangles that are 2 inches long and 1 inch wide. Wrap the paper square around a pencil tightly so it forms a cylinder, tape it, and remove it from around the pencil.

  14. Easy DIY Paper Rocket Tutorial for Kids

    Instructions: Fold colored paper into fourths. Cut along the folds (adult supervision recommended) Roll the paper around your straw. Secure the roll with tape. Pinch and tape one end. Fold the paper as shown in the video. Cut triangles from your folded paper. Use tape to attach the triangles to the "straw roll".

  15. Easy way to make a paper rocket

    Easy way to make a paper rocket OrigamiPaper size 21x21cm#diy#rocket#origami.

  16. Make a Straw Rocket

    Hands-on Activities Learn how to create a paper rocket that can be launched from a soda straw - then, modify the design to make the rocket fly farther! Find materials and step-by-step instructions on the website below. Make a Straw Rocket Create a paper rocket you can launch from a soda straw.

  17. How to Make and Launch Your Own Rocket

    Share 150K views 3 years ago #Space #Crafts We show you how to make and launch your own rocket at home using sellotape, scissors, a tube, paper and colouring pens. Download the template here:...

  18. 3 Ways to Make a Simple Rocket

    Method 1 Building a Match Rocket Download Article 1 Roll two matches in a piece of aluminum foil. Put two matches on aluminum foil with the plain ends sticking out and the match tips pointing in. Roll the matches up like a burrito. Twist one end of the foil tightly around a match and leave the other end rolled loosely. [1] 2 Anchor the matches.

  19. Paper Rocket Aerodynamics

    Make paper rockets you can launch by blowing through a straw and experiment to find out how changing the design can change how the rockets fly with this family STEM activity. Making a paper rocket that you can launch by blowing through a straw is an easy hands-on activity sure to engage paper airplane folders and rocket enthusiasts alike.

  20. How to make a paper rocket that flies.

    766 418K views 11 years ago Paper rocket made out of 2 sheets of 8.5 x 11 card stock. Using compressed air up to 120 psi this rocket can soar over 250 ft high. Launched from a PVC pressure...

  21. How to Make a Paper Rocket: 14 Steps

    Spread the loveStep 1: Gather Materials For this project, you will need the following: - A piece of A4 size paper or letter-sized paper - A straw - Scissors - Tape - A ruler - Pencil or pen Step 2: Fold the Paper in Half Fold the paper in half lengthwise, then unfold it. This is to create a guideline for folding in future steps. Step 3: Fold the Top Corners Down Fold both top ...

  22. How to Build and Launch a Paper Rocket (Fly)

    In this project you will learn how to make a simple rocket out of paper and launch it by blowing into a drinking straw. You can make one by following this video tutorial. Can you make the...

  23. Making a Paper Rocket with Easy Techniques Tutorial"

    "This tutorial shows you how to make a paper rocket with simple techniques and materials that are readily available. By watching this video, you can design a...